The Pro-Am
FEATURES The DIAMOND PRO-AM is the perfect table for “League Players” to enjoy and improve their game. The DIAMOND PRO-AM is shipped from the factory fully assembled. This one-piece slate table must be installed on the ground level. Three-piece slate is available for upstairs installation. Massive 7” rail construction utilizing six pieces of solid Oak or […]
Slate:
7', 8', and 9' table are equipped with 1" 1-piece slate.
Cloth:
Available in a wide assortment Simonis Cloth colors
Rails:
Unique Dymondwood® that is burn and dent resistant. Phenolic resin pressed into the material gives the wood its durability and luster. Dymondwood® is available in 4 different colors; Rosewood, Charcoal, Walnut, and Golden Oak.
Cushions:
Tour specified K-55 profile offers quick response. An additional ¼" top rail backing wood has been engineered between the cushion and the feather strip channel to provide consistent rail speed.
Pockets:
Patent pending bi-level design is flush to the rail. Shooting out of the pocket is just as easy as shooting off the rail.
Wedge Leveling System:
Matchless wedge leveling system built right into the slate bed. Allows the slate to be leveled without removing the rail system.
Ball Return:
Extremely quiet and efficient ball return. Pocketed balls are collected in the center of the table, then gravity fed to tail end of table. Access doors allow for entry into ball return to remove any foreign objects effortlessly.
Feet:
Leveling block is built right into the leg of the Pro-Am. As the ¾" nut is turned, each leg can be raised or lowered with ease for precise leveling. sin pressed into the material gives the wood its durability and luster. Dymondwood® is available in 4 different colors; Rosewood, Charcoal, Walnut, and Golden Oak.
Call for Other Options: 865-671-4530
  • The DIAMOND PRO-AM is the perfect table for "League Players" to enjoy and improve their game.
  • The DIAMOND PRO-AM is shipped from the factory fully assembled.
  • This one-piece slate table must be installed on the ground level.
  • Three-piece slate is available for upstairs installation.
Massive 7” rail construction utilizing six pieces of solid Oak or Ash hardwood butcher-blocked together. One piece of poplar is used in the front portion of rail. This construction prevents warping. Poplar wood is used in the front of the rail to glue the cushion rubber directly to the sub-rail. Poplar accepts staples easier than other wood types, when covering cushions with cloth. ¼” feather strip channel is cut into the top of rail for securing cloth over the top side of the cushion then stapled to the bottom side of the poplar wood. Burn and dent resistant Dymondwood – (5/8” thickness) is glued on the top and side of the butcher-block rail system for extreme durability. K-55 profile cushions are “glued” (not bolted) directly to the rail system for consistent rebound and optimum playability.